Moen shower valve – However, this cartridge is not exempt from the impact of disasters and wear. And the years go, they gather rust from constant exposure to moisture. All you have to do is consider the following simple steps. If you prefer to spray some insect killer on the wall, wearing a mask to protect the security of your lungs.
First of all, stop the water flow by turning the main moen shower valve for you to refer to the labels ‘ shut down ‘. You may find this valve under the sink, some with polished brass pipes are connected. So boring to do it manually, you can use a simple tool. After that, the shower handle to open the Center and stay like this for a while. This will remove all excess water in the pipe before closing the valve. And then, find a star-shaped hole in the bottom of the bathtub. Then convert each loosen. You can use the hex wrench to simplify the work. Remove the top of the base weiglid now out of place. If this is now loose, remove the whole base, and should see a pipe system in the walls, however, and the cartridge.
If you can see these leaks of bolt in the pipeline, just tighten the nuts using the wrench. If the tube actually cause a leak, use finally leak close unnecessary flow. With a wrench, adjustable buckle cartridge. Then gradually moen shower valve, Rotate counterclockwise to remove it from its place. Your replacement cartridge handle uses the same key code United Kingdom and put them in place. Rotate the lock position, this time, in a clockwise direction. When you hear the click, the cartridge is now in place.