Dartboard cabinet – Hanging a dartboard in a cabinet requires a mount to be inserted into the cabinet and requires a few proper measurements. A dartboard should be hung at a certain height in order to ensure that the game is played correctly. Measure from the floor up to the place in the closet that would be ideal to hang a dartboard. In the middle of the cabinet in which the dart will be hung should be 5 meters 8 inches from the floor. This is important because the distance from the floor to the bull’s eye must be exactly 5 meters and 8 inches of regulation play.
Prepare dartboard cabinet. Take your console, which can be purchased at any hardware store, and center it up in your closet. The bracket must have two small holes at both ends and a notch in the middle to hang dartboard on. Make sure the bracket is straight and to the middle of the bracket is 5 meters 8 inches off the floor. When satisfied that you have your bracket placed in the desired area, screw it into the cabinet. The bracket must be screwed directly in the chassis at both ends with one-inch screws.
Prepare dartboard for hanging by unscrewing the 1/2-inch screw into the back of the dart board just behind the bull’s eye. It is important that the screw goes in the exact center of the dart board in order for it to hang straight. Only unscrew the screw in half of the way, then head of the screw is not flush against the back of the dartboard cabinet.