Dinosaur bedding twin – Special beds add to the decor of a child’s room. But premade specialty beds or professional, tailored pieces are expensive. Make your own custom bed allows you to create a special place for your child without spending a fortune. For example, if your little one wants a dinosaur bedroom, use a piece of plywood and paint to create a custom dinosaur bed, shaped like his favorite prehistoric creature.
Outline the shape of a dinosaur on a piece of 1/2-inch plywood. Use a picture of a dinosaur book or online resource as a guide. Do dinosaur body length of the mattress. Cut dinosaur shape of plywood by means of a jigsaw puzzle. Smooth the edges of the cutout use medium grit sandpaper. Brush away any sawdust with a dry brush. Paint dinosaur bedding twin, as desired, using the flat wall paint. Choose colors that match the bedding for the room. Let the paint dry overnight. Apply a second layer, if necessary, for complete coverage.
Paint details about dinosaur after layer dries the base, including the eyes, nose and a mouth. Use a dinosaur image for details reference. Let the paint dry overnight. Seal the surface of the dinosaur with an acrylic spay sealant. Spray the surface of the wood cutting according to the bottle directions. Let it dry overnight. Attach the dinosaur on the wall where you want the bed to be using a hammer and nails. Place the nails 1 inch in from the outer edge of the dinosaur bedding twin, each 12 inches, for the best results. Place a bedframe against dinosaur that runs the length of the dinosaur’s body, and set up the bed.