Sewing machine cabinet – How to convert an old sewing machine cabinet? To convert a cabinet sewing old boards hinges must be removed from the top of the cabinet. This should leave a rectangular opening in the upper part of the cabinet. A support panel is installed inside the cabinet of the sewing machine to sit and two top panels are cut to be tight against the machine to the height of the needle plate.
The sewing machine cabinet will be built into the cabinet, creating a smooth, flat surface seam. For those unsure of power tools or a lack of tools, the convert of sewing machine cabinet project can still be made with a hand saw, scroll saw and a keyhole saw. They are not too expensive and can be found in any hardware store. The handsaw costs about $ 10 and the tunnel and saw the lock run about $ 5.
12 Photos Gallery of: Convert an Old Sewing Machine Cabinet
The exercises are quite common, so you borrow one from a friend. Do not forget the bits, one bit sized to the width of screws used and one to drill holes for the jigsaw, and a small flat-head screwdriver and Philips depending on the screws used for the sewing machine cabinet.